REFRESH INSTRUCTIONS

We recommend washing your vehicle in cool condition when possible. Hot surfaces will affect the working time of REFRESH wash soap.

FOAM GUN: Add approximately 4 ounces of REFRESH wash soap to the foam gun. Fill the foam gun with water to the manufacturer’s recommended instruction. Pre-rinse any heavy dirt and debris from the vehicle before applying the product. Spray REFRESH from top to bottom, working your way around the vehicle. Allow REFRESH to dwell on the surface for up to 30 seconds. DO NOT allow the product to dry on the vehicle. Rinse the vehicle from top to bottom, working your way around it. Dry the vehicle with microfiber towels or use an air blower for optimum results. Depending on the size of the vehicle, washing in sections may be ideal.

BUCKET WASH: Add approximately 4–6 ounces of REFRESH wash soap to a 5-gallom bucket. Add 3–4 gallons of water. Pre-rinse any heavy dirt and debris from the vehicle before bucket washing. Use multiple clean microfiber towels to was the vehicle with REFRESH from top to bottom, working your way around it. DO NOT allow the product to dry on the vehicle. Rinse the vehicle from top to bottom, working your way around it. Dry the vehicle with microfiber towels or use an air blower for optimum results. Depending on the size of the vehicle, washing in sections may be ideal.

DRYING: We recommend drying the vehicle with compressed air or a blower to avoid scratching the surface. You can also use plush microfiber towels to dry in a side to side motion.